Medical Device Market

Customers in the medical device market face the on-going challenge of regulatory concerns, time-to-market and intellectual property (IP) protection. Perhaps this is why so many large medical device companies have decided to work with C&J Industries. At the center of C&J's core business philosophy is trust. This isn't just something nice to say; it's part of our Mission Statement. So if you need to work with a medical device manufacturer that has both experience and integrity, C&J may be the right company for you.

C&J has more than solid business ethics-we have the quality systems and capabilities to produce the most complicated medical devices. C&J Industries is an FDA registered medical device manufacturer. We are also ISO 13485:2003 and ISO 9001:2008 certified as well. C&J is well versed in product validation (IQ, OQ & PQ) as well as product testing and DOE's. To learn more about our medical device manufacturing capabilities, review some of the case studies below, or contact us.

Medical Packaging

As customers demand for complete medical device products has grown, C&J Industries has kept pace by improving our contract manufacturing capabilities. Whether using Tyvek® heat-sealed pouches for small medical components, or a complex vacuum formed tray for a medical device kit, C&J has multiple solutions for your medical device packaging. C&J offers medical packaging for products in Class VII or Class VIII clean room environments.

Laparoscopic Surgical Device

When Aragon Surgical conducted a nationwide search for a medical device contract manufacturer to produce their LapCapTM, they chose C&J Industries. Overall responsiveness, C&J's Quality Systems and our ability to apply significant company resources to accelerate delivery of the new laparoscopic enabling device were keys to making that choice.

Being able to provide both Product Design and Manufacturing Engineering resources to the front end of the project greatly reduced the normal product development cycle. C&J helped Aragon Surgical bring their product to market several weeks ahead of schedule-making this a great success story for both companies.

Bone Graft Filter

A medical device manufacturer came to C&J Industries to manufacture a reamer and aspirator used in a medical procedure to repair complicated compound fractures of the femur. As an aid to healing, our customer also had C&J Industries manufacture a Bone Graft Filter that separates unwanted materials-allowing the reintroduction of the bone graft to aid healing. We manufacture the entire device, including an over-molded filter mesh which is pressure tested and final packed for sterilization.

Bulb Cap & Cylinder

A medical device manufacturer came to C&J Industries to manufacture a Contact Lens Solution Enclosure. The Process Validation requirements for this product were incredible. C&J Industries was able to offer our extensive knowledge of the IQ, OQ and PQ process validation requirements for this project. To aid in the on-going test and validation requirements for the project, C&J Industries built our own pressure vessel test equipment and also helped to specify the Screw Cap automation assembly equipment.

Syringes and SPE Tubes

When multiple customers come to you for similar parts, you know you must be doing something right. That is the case with specialty Syringes and Tubes. C&J Industries has gained considerable expertise molding both translucent as well as clear Tubes and Syringes. We've recently expanded our medical molding capabilities and now have 21 presses in our Class VIII (100,000) count Clean Room. If you need more than just a molded Tube or Syringe, we have secondary Pad Printing and Automation Assembly capabilities as well.

In-vitro Fertilization Pipette Holder

Our customer had a tight timeline to devise a new holder for their .040" diameter glass pipette. The challenge was to develop an injection molded holder with a single piece design which could withstand a 3' drop test and the removal force could not exceed ½ lb.

To meet both criteria, C&J Industries developed a series of finger retention features that cradle the pipette. A living hinge was added to the case design to allow single-hand use by the clinician. In the fully open position, the case also serves as a working platform. If your project requires innovation and experience, contact us for more information.

Medical Device Housing

C&J Industries has extensive experience producing High-Cosmetic Cabinetry Parts. Some of our customers face the dilemma of a limited program life (less than 100,000 pieces) and a limited budget.

By utilizing our off-shore tooling resources, C&J can provide lower-cost tooling while still offering our unique tool warranty. With a full-line of secondary assembly capabilities in-house, we can truly be your single source solution for your injection molding programs.

To learn more how we can help you with your Medical Device Manufacturing, please contact us today.