C&J Industries

Being able to provide both Product Design and Manufacturing Engineering resources to the front end of the project greatly reduced the normal product development cycle. C&J helped Aragon Surgical bring their product to market several weeks ahead of schedule—making this a great success story for both companies.

To find out more about our Medical Device Contract Manufacturing capabilities, contact us today

An easy-grip lever arm accurately dispenses the exact dose with each activation. This data is captured electronically and can be retrieved by the prescribing physician during a regular office visit.

To find out more about this application, please contact us today.

As an aid to healing, our customer also had C&J Industries manufacture a Bone Graft Filter that separates unwanted materials.

We manufacture the entire device, including an over-molded filter mesh which is pressure tested and final packed for sterilization. To find out more about our medical device contract manufacturing capabilities, please contact us today.

The challenge was to develop an injection molded holder with a single piece design which could withstand a 3' drop test. In addition to the drop test specification, the Pipette removal force could not exceed ½ lb.

To meet both criteria, C&J Industries developed a series of finger retention features that cradle the pipette. A living hinge was added to the case design to allow single-hand use by the clinician. In the fully open position, the case also serves as a working platform.

To find out more about this application, please contact us today.

C&J Industries was able to offer our extensive knowledge of the IQ, OQ and PQ process validation requirements for this project. To aid in the on-going test and validation requirements for the project, C&J Industries built our own pressure vessel test equipment and also helped to specify the Screw Cap automation assembly equipment.

To find out more about our medical device contract manufacturing capabilities, please contact us today.

The result was a thick walled syringe which was prone to voids. Through the use of Mold Flow Analysis, we developed a gating solution that addressed this molding challenge. We were able to offer our complete medical device manufacturing capabilities to our customer with Pad Printing and final package services.

To find out more about our medical device contract manufacturing capabilities, please contact us today.